Details - News Content

Paper from one supplier seems to contain plenty of dust. Is there a standard for what is acceptable?

Apr 28, 2020, 13:40 by Anonymous (not verified)

Full story
I heard that OSHA recently updated the National Emphasis Program on amputations. How does that affect my printing business?

Apr 28, 2020, 13:38 by Anonymous (not verified)

Full story
I have a four-color separation that appeared ok on the screen and in the proof, but a moir� appeared in the printed image. To our knowledge our screen angles and RIP settings are correct. Why is this happening?

Apr 28, 2020, 13:36 by Anonymous (not verified)

Full story
A customer is disputing the size of the type we used in a brochure claiming the type is too small and not 12-point. What are the character height tolerances for different point size fonts?

Apr 28, 2020, 13:31 by Anonymous (not verified)

Full story
Are there standards for the cleanliness of a printing facility?

Apr 28, 2020, 13:28 by Anonymous (not verified)

Full story
Some of the software on my Mac is behaving erratically, unlike the way it worked after it was installed. Someone suggested that I zap ?� the computer; what are they talking about?

Apr 28, 2020, 13:26 by Anonymous (not verified)

Full story
I just purchased a used 40-inch, 5-color sheetfed press to replace a smaller-format press. What installation issues, if any, do I need to consider?

Apr 28, 2020, 11:57 by Anonymous (not verified)

Full story
Are online training programs acceptable for compliance with OSHA's worker training requirements?

Apr 28, 2020, 11:54 by Anonymous (not verified)

Full story
What is paper sizing?

Apr 28, 2020, 11:51 by Anonymous (not verified)

Full story
We don't measure anything other than our financial performance. What else should we be measuring?

Apr 28, 2020, 11:29 by Anonymous (not verified)

Full story
On the digital front end (DFE) of my press, I see different options for rendering intents for separating color. What are they, and what's the difference?

Apr 28, 2020, 11:27 by Anonymous (not verified)

Full story
What are hickies?

Apr 28, 2020, 11:24 by Anonymous (not verified)

Full story
I heard of a printing competitor that received an enforcement letter about unlicensed software. Who is behind that and how do I protect myself from a similar fate?

Apr 28, 2020, 10:54 by Anonymous (not verified)

Full story
Why is calcium carbonate added to paper?

Apr 28, 2020, 10:50 by Anonymous (not verified)

Full story
What's the future of non-paper substrates and production inkjet?

Apr 28, 2020, 10:45 by Anonymous (not verified)

Full story
The company that takes my scrap paper (and paid me for it) sent me a letter stating that the paper recycling market is down and their processing costs are rising, so they may have to charge me for their freight and processing costs. I rely on the revenue

Apr 28, 2020, 10:28 by Anonymous (not verified)

Full story
Will production inkjet become the dominant print method used by commercial printers?

Apr 28, 2020, 10:22 by Anonymous (not verified)

Full story
We just completed an inventory of our cut sheet paper. We found several cartons of wrapped ream paper left over from jobs we printed several years ago. How long can paper be kept in storage?

Apr 28, 2020, 10:18 by Anonymous (not verified)

Full story
In your opinion, has the quality and performance of inkjet presses reached offset levels?

Apr 28, 2020, 10:14 by Anonymous (not verified)

Full story
We printed a job on a plastic sheet with no problems on the first side, but when we printed the back side some of the images had a mottled appearance and it appeared there was a faint image of the first side appearing in the mottle. What could have caused

Apr 28, 2020, 10:07 by Anonymous (not verified)

Full story

Paper from one supplier seems to contain plenty of dust. Is there a standard for what is acceptable?

I heard that OSHA recently updated the National Emphasis Program on amputations. How does that affect my printing business?

I have a four-color separation that appeared ok on the screen and in the proof, but a moir� appeared in the printed image. To our knowledge our screen angles and RIP settings are correct. Why is this happening?

A customer is disputing the size of the type we used in a brochure claiming the type is too small and not 12-point. What are the character height tolerances for different point size fonts?

Are there standards for the cleanliness of a printing facility?

Some of the software on my Mac is behaving erratically, unlike the way it worked after it was installed. Someone suggested that I zap ?� the computer; what are they talking about?

I just purchased a used 40-inch, 5-color sheetfed press to replace a smaller-format press. What installation issues, if any, do I need to consider?

Are online training programs acceptable for compliance with OSHA's worker training requirements?

What is paper sizing?

We don't measure anything other than our financial performance. What else should we be measuring?

On the digital front end (DFE) of my press, I see different options for rendering intents for separating color. What are they, and what's the difference?

What are hickies?

I heard of a printing competitor that received an enforcement letter about unlicensed software. Who is behind that and how do I protect myself from a similar fate?

Why is calcium carbonate added to paper?

What's the future of non-paper substrates and production inkjet?

The company that takes my scrap paper (and paid me for it) sent me a letter stating that the paper recycling market is down and their processing costs are rising, so they may have to charge me for their freight and processing costs. I rely on the revenue

Will production inkjet become the dominant print method used by commercial printers?

We just completed an inventory of our cut sheet paper. We found several cartons of wrapped ream paper left over from jobs we printed several years ago. How long can paper be kept in storage?

In your opinion, has the quality and performance of inkjet presses reached offset levels?

We printed a job on a plastic sheet with no problems on the first side, but when we printed the back side some of the images had a mottled appearance and it appeared there was a faint image of the first side appearing in the mottle. What could have caused

Are You Sure You Want To Leave Our Site?

Are You Sure You Want To Leave Our Site?